The Universal Implant Prosthetic Driver Kit with Torque Wrench, gives you the ability to handle any implant brand attachment.
For pricing and purchasing, please visit: Universal Prosthetic Kit
What are the benefits of the Universal Prosthetic Kit ?
The Universal Implant Prosthetic Driver Kit with Torque Wrench, comes with a variety of drivers for the most commonly used implant brand attachments. This saves you time and money by not having to order the drivers from many different companies.
What drivers are included in the Universal Prosthetic Kit and it there a Torque wrench included?
The kit includes a total of 8 drivers in total split between 4 different kinds of attachments, with a short (10mm) and long (15mm) version of each each driver.
The full list is as follows:
-
Green - 1.2mm Hex (Long 15mm, Short 10mm): 3I, Keystone, Megagen, Hiossen/Ostem
-
Blue - 1.25/1.27mm Hex (Long 15mm, Short 10mm): Zimmer, Astra, BioHorizons, Intr-Lock, MIS, SteriOss, Sybron, Implant Direct, PerioSeal
-
Purple - ITI/SCS (Long 15mm, Short 10mm): “ITI” driver for Straumann SCS
There is also an Adjustable Torque Wrench (10 - 40 Ncm) that comes with the kit.
What about square heads? What is the optional convert adapter for Universal Prosthetic Kit?
When you purchase the prosthetic kit, you have the option of also adding a Convert Adapter to your order. The adapter helps convert square head driver to round head to use our torque wrench.
What is exact total length of short & long driver from top to tip and from where is it measured from?
The exact measurements are actually 10mm for the short and 15mm for the long. The measurement is from the the bottom of the adapter to the tip. So although, some sites may list the drivers as 9mm and 14mm, respectively, the tip of the driver where it engages is 1mm. So when you include the tip, the lengths become 10mm and 15mm.
Do you have any longer drivers that are not included in the kit?
We also have a 25mm extra long driver tip available now, which can be purchased separately. Please visit: Replacement Hex Drivers for the Universal Prosthetic Kit
What is the process for Cleaning & Sterlization of the Universal Prosthetic kit?
Before initial use and after each procedure, clean all components and the torque wrench with a wet towel or disinfectant wipe. Do not hold the wrench under running water which would allow water to creep inside the wrench. The entire kit and the torque wrench may be sterilized by steam autoclave. It is recommended but not required to use de-ionized water in the autoclave to prolong the life of the torque wrench. Sterilize for 20 minutes at 135°C (275°F).